-40%
Di-Acro, Model 1A,  3D Printed, PLA, Tube Bending Dies for thin-wall tubing
Di-Acro, Model 1A,  3D Printed, PLA, Tube Bending Dies for thin-wall tubing
Di-Acro, Model 1A,  3D Printed, PLA, Tube Bending Dies for thin-wall tubing

Di-Acro, Model 1A,  3D Printed, PLA, Tube Bending Dies for thin-wall tubing

$ 17.31

Availability: 10 in stock
  • Control: Manual
  • Condition: New
  • Model: Model 1A
  • All returns accepted: ReturnsNotAccepted
  • Machine Type: Diacro 1A
  • Brand: Di-Acro
  • Treated Material: 3D Printed
  • Country/Region of Manufacture: United States
  • Max Bending Angle: 180 degrees

    Description

    Diacro 1A
    tube bending dies.
    These are new, 3D printed, Di-Acro "A" Style, bending dies using Polylactic Acid (PLA) material.
    I have successfully used these bending dies to bend 0.028" and 0.035" wall, 4130 and stainless steel tubing.  PLA dies are suitable for bends that are at least 3X the diameter of the tube.  In this case, the center line bend radius is 1.25" for a 3/8" 0.035" tube.  The wall width and inner fill ratios are adjusted to tolerate the bending forces exerted on the dies.
    Condition is "New".   The hard steel versions of these dies cost 5 to 0 new.  My 3D dies are 10% of the steel price.
    I change color depending on tube diameter making them easier to identify or sort.
    I have successfully made dies for 1/4", 5/16 and 3/8" tubing with center line bend radius from 1" up to 2.5".  I have not tested these dies beyond 3/8" x 0.035" with 4130 tubing.
    If you are interested in a different size, up to 1/2"  (or 12mm) diameter, or specific color, please send me a message and we can work out details.
    Shipped with USPS Mail.