Diacro #36 Finger Brake With Diacro Stand

Description

This is a used but we'll taken care of  Diacro # 36 finger brake for 16 gage ,it only has qty= 4  6" fingers with the unit . No back gauge , This unit is mounted on a factory Diacro table on caster wheels It operates great I have had no issues with this unit.
F
inger Brake is used to form and duplicate boxes, pans, angles, channels, flanges, and "V's" out of sheet metal – up to 16 gauge mild steel. The operator can easily adjust for material thickness, and use adjustable stops to control bend angle. Box finger segments enable the operator to form boxes from 3/4" up to the full width of the machine in increments as small as 1/4".
Maximum capacity: 16 ga. mild steel
Maximum forming width: 36"
Maximum depth of box or pan: 3"
Minimum reverse bend: 1/4"
Maximum angle bend
(one operation):
135°
Maximum back gauge adjustment:
24"
Weight: 550 lbs.
an but if you would like to make the arrangements on this that would be fine but we will need to talk first.. again thank you for looking!