-40%
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand
Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand

Eastwood Heavy Duty 50 Inch Metal Fabrication and Forming Slip Roller with Stand

$ 1267.19

Availability: 12 in stock
  • Machine Type: Roll/Tube Bending Machine
  • Condition: New
  • Brand: Eastwood
  • UPC: 607174160884

    Description

    The Eastwood Heavy-Duty 50" Slip Roller with Base is designed to easily form evenly radiused rolls in sheet metal panels up to 48” wide. Capable of forming mild steel as thick as 16 gauge and solid rod material in 5/16”, 1/4” & 3/32” & 1/16”. A selectable 3.25:1 gear reduction feature allows precise control with reduced effort for maximum ease of use.
    3.5:1 gear reduction for smooth control
    Roll up to 16 gauge mild steel
    Roll up to 14 gauge aluminum
    Rolls diameters of 2.5” [63mm] and larger
    Easily and accurately form bends, cones and cylinders
    Form patch panels, trans covers, driveshaft tunnels, rounded truck bed rails
    Great for making artwork and custom ornaments
    Even form 4 sizes of rod: 1/16”, 3/32”, 1/4”, 5/16”
    Rigid structure ensures accuracy when making full-width bends
    Includes Stand
    Specifications
    Maximum Material Width: 48" [1.22m]
    Maximum Material Thickness: 14Ga. [2mm]
    Available Gear Ratios: 1:1 & 3.5:1
    Minimum Roll Diameter: 2.5" [63mm]
    Wire/Rod Diameter Capability: 1/16", 3/32", 1/4", 5/16"
    Contents
    (1) Heavy Duty 50” Slip Roller
    (2) Stand Legs
    (2) Tie Rods (with M20 Nuts and Washers installed)
    (1) Drive Crank
    (4) M12 x 40mm Bolts
    (4) 12mm Washers
    WARNING
    - California Proposition 65 - www.P65Warnings.ca.gov